Structure of the TAMI dog box

Simple step-by-step instructions

This is how you inflate your TAMI dog crate

  1. Check the size of the TAMI dog crate to make sure it is suitable for your dog.
  2. Make sure you have a suitable air pump. It's best to use the original TAMI foot pump .
  3. Lay the TAMI dog crate out on a flat surface.
  4. Open the valve closure.
  5. Connect the air pump to the valve.
  6. Pump up the dog crate until the walls are full. The original TAMI foot air pump does not allow any more air into the box when it is sufficiently filled with air.
  7. Close the valve and check the stability and therefore the safety of the TAMI dog crate before using it.

Build up

  • Unfold the box and open the valve lid.
  • Close the valve by pushing the yellow pin inwards and turning it at the same time. The pin pops out into the “inflate position”.
  • The box can then be inflated (approx. 3 PSI). To do this, the pump hose is placed on the valve and screwed clockwise. 
  • Close the valve cover so that there is no risk of injury.

Combine

  • Open the valve by
    pushing the yellow pin inwards and turning it at the same time. This allows the air
    to escape from the box.
  • Fold both side walls of the box inwards, then fold the back wall of the box down so that the air can escape.
  • If desired, you can fold the box lengthwise and hook the two short straps into the D-rings on the front and back. This means the box can be stored to save space and is practical to carry.